SCAPS-based Simulation Analysis of Device Parameters of ZnO-inverted Polymer Solar Cells

Ibrar Ahmad,Khizar Hayat, Muhammad Ashraf, Muhammad Imran,Said Karim Shah

OPTICAL AND QUANTUM ELECTRONICS（2023）

Cited 0|Views5

No score

Abstract

This article reports the simulation of ZnO-based polymer solar cell (PSC) device parameters. The Solar Cell Capacitance Simulator (SCAPS-1D) software was used to analyze the cell parameters. Two different device configurations of PSCs were simulated with ZnO (an inverted device) and without ZnO (a reference device). The important device processing parameters such as working temperature (T), defect densities (Nt), series (Rs), and shunt (Rsh) resistances on cell performance were investigated. Comparing simulated and experimental results, a good correlation between PSCs was observed. The efficiencies of reference PSCs are 0.87

Translated text

Key words

SCAPS-1D,Polymer solar cell,ZnO- electron transport layer,ZnO- based inverted polymer solar cells,J-V characteristics

AI Read Science

Must-Reading Tree

Example

Generate MRT to find the research sequence of this paper

Chat Paper

Summary is being generated by the instructions you defined