The high cycle fatigue behavior, failure characteristics, and fatigue life empirical relationship of 9% Cr steel under different stress ratios at 630 degrees C

During the startup and shutdown processes of the steam turbine rotor, the fatigue failure behavior caused by asymmetric stress is introduced. To study the effect of mean stress on the fatigue failure behavior of 9% Cr steel at high temperatures, the high cyclic fatigue tests are conducted under different stress ratios (R = -1, 0.1, 0.5, and 0.7) at 630 degrees C. The results indicate three fatigue failure modes: surface crack initiation failure, sub-surface crack initiation failure, and necking induced failure. With the increasing stress ratio, the surface and sub-surface crack initiation failure modes gradually change to necking induced failure mode. Moreover, the oxide intrusiveextrusion mechanism primarily determines the surface crack initiation failure and promotes surface defect formation. Meanwhile, the inhomogeneous microstructure induces sub-surface crack initiation failure, wherein the crack propagates along the martensitic lath boundary or through the martensitic lath. The attenuation of mechanical properties and the increase in mean stress level are the critical factors affecting the necking induced failure under 630 degrees C. In addition, the mean stress sensitivity factor (MR) is proposed to explain the effect of the stress ratio on fatigue performance. Furthermore, the mean stress sensitivity factor (MR) can be used to quantitatively analyze the effect of mean stress on fatigue properties under different stress ratios. Finally, the fatigue life empirical relationship considering the mean stress sensitivity factor (MR) is constituted.