Clay rich river sediments calcined into precursors for alkali activated materials

Alkali activated materials (AAMs), a potential alternative to cement-based products or ceramics, can incorporate large amounts of currently landfilled aluminosilicate rich materials such as calcined clay-rich river sediments collected at hydropower plant dams. Untreated fresh sediment and untreated aged sediment intended to serve as AAM precursors were calcined to increase their amorphous content, then activated by Na or K-based silicate or hydroxide solutions and cured at 60 degrees C for three days.Up to 30 mass % (ma%) of fly ash (FA) or ladle slag (LS) increased the mechanical performance. The phase composition and microstructure are analyzed using X-ray diffraction, fourier-transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and mercury intrusion porosimetry to gain further insight into how the additives influence the final properties of the resulting AAMs. The main crystalline components of the prepared AAMs are quartz, illite/muscovite and feldspar. The amorphous content reaches up to 52.5 ma% in the Na-activated AAMs and up to 48.8 ma% in K-activated AAMs. The acquired results confirm the suitability of the investigated sediments as sole precursors for AAMs. The mechanical properties of the AAMs can be improved by adding FA and/or LS.