A New Theoretical Method for Studying Effects of Microstructure on Effective Thermal Conductivity of Vermicular Graphite Cast Iron

To provide the basis for thermal conductivity regulation of vermicular graphite cast iron (VGI), a new theoretical method consisting of shape interpolation, unit cell model and numerical calculation was proposed. Considering the influence of the graphite anisotropy and interfacial contact thermal conductivity (ICTC), the effective thermal conductivity of a series of unit cell models was calculated by numerical calculation based on finite difference. The effects of microstructure on effective thermal conductivity of VGI were studied by shape interpolation. The experimental results were in good agreement with the calculated ones. The effective thermal conductivity of VGI increases in power function with the decrease in graphite shape parameter, and increases linearly with the increase in graphite volume fraction and thermal conductivity of matrix. When the graphite volume fraction increases by 1%, the thermal conductivity of nodular cast iron increases by about 0.18 W/(m center dot K), while that of gray cast iron increases by about 3 W/(m center dot K). The thermal conductivity of cast iron has the same sensitivity to the thermal conductivity of matrix regardless of the graphite shape parameter. The thermal conductivity of matrix increased by 15 W/(m center dot K) and the thermal conductivity of cast iron increased by about 12 W/(m center dot K). Moreover, the more the graphite shape deviates from the sphere, the greater the enhancement effect of graphite anisotropy on thermal conductivity than the hindrance effect of interface between graphite and matrix. This work can provide guidance for the development of high thermal conductivity VGI and the study of thermal conductivity of composites containing anisotropic dispersed phase particles with complex shapes.