Observations of the Boundary Layer in the Cape Grim Coastal Region: Interaction with Wind and the Influences of Continental Sources.

A comparative study and evaluation of boundary layer height (BLH) estimation was conducted during an experimental campaign conducted at the Cape Grim Air Pollution station, Australia, from 1 June to 13 July 2019. The temporal and spatial distributions of BLH were studied using data from a ceilometer, sodar, in situ meteorological measurements, and back-trajectory analyses. Generally, the BLH under continental sources is lower than that under marine sources. The BLH is featured with a shallow depth of 515 +/- 340 m under the Melbourne/East Victoria continental source. Especially the mixed continental sources (Melbourne/East Victoria and Tasmania direction) lead to a rise in radon concentration and lower BLH. In comparison, the boundary layer reaches a higher averaged BLH value of 730 +/- 305 m when marine air is prevalent. The BLH derived from ERA5 is positively biased compared to the ceilometer observations, except when the boundary layer is stable. The height at which wind profiles experience rapid changes corresponds to the BLH value. The wind flow within the boundary layer increased up to similar to 200 m, where it then meandered up to similar to 300 m. Furthermore, the statistic shows that BLH is positively associated with near-surface wind speed. This study firstly provides information on boundary layer structure in Cape Grim and the interaction with wind, which may aid in further evaluating their associated impacts on the climate and ecosystem.