Combined Use of Polyurethane Prepolymer and Aromatic Oil in Physicochemical Rejuvenation of Aged SBS Modified Bitumen for Performance Recovery.

The high-quality reutilization of waste styrene-butadiene-styrene copolymer (SBS) modified asphalt mixtures is a difficult issue in the field of highways today, and the main reason is that conventional rejuvenation technology fails to achieve the effective rejuvenation of aged SBS in binder, causing significant deterioration in the high-temperature performance of the rejuvenated mixture. In view of this, this study proposed a physicochemical rejuvenation process using a reactive single-component polyurethane (PU) prepolymer as the repairing substance for structural reconstruction and aromatic oil (AO) as a common rejuvenator used to supplement the lost light fractions of asphalt molecules in aged SBSmB, according to the characteristics of oxidative degradation products of SBS. The joint rejuvenation of aged SBS modified bitumen (aSBSmB) by PU and AO was investigated based on Fourier transform infrared Spectroscopy, Brookfield rotational viscosity, linear amplitude sweep, and dynamic shear rheometer tests. The results show that 3 wt% PU can completely react with the oxidation degradation products of SBS and rebuild its structure, while AO mainly acted as an inert component to increase the content of aromatic components, thereby reasonably adjusting the compatibility of chemical components of aSBSmB. Compared with the PU reaction-rejuvenated binder, the 3 wt% PU/10 wt% AO rejuvenated binder had a lower high-temperature viscosity for better workability. The chemical reaction between PU and SBS degradation products dominated in the high-temperature stability of rejuvenated SBSmB and had a negative impact on its fatigue resistance, while the joint rejuvenation of 3 wt% PU and 10 wt% AO not only gave a better high-temperature property to aged SBSmB but could also have the capacity to improve its fatigue resistance. Compared to virgin SBSmB, PU/AO rejuvenated SBSmB has comparative low-temperature viscoelastic behavior characteristics and a much better resistance to medium-high-temperature elastic deformation.