Experimental Investigation into the Erosion Performance of Water Jets on Marine Hydrate-Bearing Sediment

Fine-grained natural gas hydrate (NGH) reservoirs are widely distributed across the world and bear more than 90% of global NGH. However, it is difficult to exploit this kind of NGH reservoir economically and environmentally using conventional methods. Water-jet cutting is an efficient and environmentally friendly technique for mining such hydrate reservoirs, as the production process does not depend on mass and heat transfer within the formations. In this work, a series of physical experiments were conducted to clarify the erosion performance of marine hydrate-bearing sediment (HBS) impacted by water jets. The results show that the accumulation of sediment particles and hydrate particles at the bottom of erosion hole severely inhibits the vertical erosion of HBS by water jet. For a particular jet flow rate, the jet distance has an optimal value, which is between 4 mm and 28 mm. Moreover, the upwelling flow containing solid particles has a significant impact on the erosion of the hole top. In reservoirs with a low hydrate saturation (20-40%) and reservoirs with a high hydrate saturation (60-80%), the erosion holes exhibit a gourd shape and a bamboo shape, respectively. In addition, the volume erosion efficiency and the depth erosion efficiency are more sensitive to the variation in jet flow rate than jet distance and hydrate saturation. This study can provide theoretical and technical support for the application of water-jet cutting in the exploitation of marine HBS.