Metal-oxide nanocomposite catalyst simultaneously boosts the oxygen reduction reactivity and chemical stability of solid oxide fuel cell cathode
CHEMICAL ENGINEERING JOURNAL(2023)
摘要
Conductive perovskite oxides have received much attention as promising candidates for solid oxide fuel cell (SOFC) cathodes. However, they show chemical instability due to the segregation of A-site cations on the surface at high temperatures, which causes their performance to degrade. Moreover, the high activation barrier to ox-ygen reduction reactions makes these materials more difficult to use as electrodes at lower temperatures (less than 700 degrees C). Herein, by combining two general techniques: nanoparticle infiltration and atomic layer deposition (ALD), we significantly improve both the durability and reactivity of a state-of-the-art perovskite oxide, La0.6Sr0.4Co0.2Fe0.8O3-delta (LSCF). Ag nanocatalysts are dispersed onto an LSCF cathode via wet infiltration, after which they are covered with a thin ZrO2 layer via ALD to prevent the agglomeration of nanocatalysts and the segregation of Sr ions. Accordingly, the Ag/ZrO2 nanocomposite-deposited LSCF cathode shows the electrode resistance of 0.085 Omega cm2 at 650 degrees C over 200 h, which is, to the best of our knowledge, the near-record level among all nanocatalyst-infiltrated LSCF cathode to date. Our result suggests a new research direction to fully utilize nanocatalysts and perovskite oxides in SOFCs, which can be a shortcut to their commercialization.
更多查看译文
关键词
Solid oxide fuel cells,Oxygen reduction reaction,Stabilization,Atomic layer deposition,La0,6Sr0,4Co0,2Fe0,Nanocatalysts
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要