Dynamic recrystallization behavior of single-phase BCC structure AlFeCoNiMo0.2 high-entropy alloy

The Gleeble-3800 thermomechanical simulator unit was used to perform single-pass hot compression tests of the single-phase BCC structure AlFeCoNiMo0.2 high-entropy alloy at the deformation temperature of 950-1150 degrees C and strain rate of 0.001-1s-1. The hot deformation behavior of the alloy was studied, and the dynamic recrystallization critical strain was determined by the work hardening rate. The dynamic recrystallization mechanism of the alloy was revealed with the microstructure characterization techcique. The study results showed: The dynamic recrystallization critical strain of AlFeCoNiMo0.2 high entropy alloy did not show any notable dependency on the deformation temperature and strain rate. Without reaching the recrystallization temperature, the massive generation of subgrain structures suppresses the formation of dynamic recrystallization grains. The nucleation mechanism of the high-entropy alloy is subgrain merging mechanism caused by dislocation motion. (c) 2023 The Author(s). Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).