Vision measuring technology for the position degree of a hole group.

The hole is one of the most important geometric elements in mechanical parts. The center distance of a hole group measurement method based on machine vision is proposed for solving the influence of perspective distortion and improving the applicability of vision systems. In the method, the plane equation of the measured plane is obtained by the line structured light vision technology, and the process is free from the constraints of the calibration plate. In order to eliminate the effect of projection distortion on the measurement accuracy, a local coordinate system is established on the plane of the measured hole group, the hole diameter, and the center distance of the hole group, which could be calculated by the local coordinates of the hole edge points. In the experiment, the flange is taken as the measured object, the distances between the holes on the flange are obtained by the method proposed in this paper, and the measurement results compared with the data are obtained by a coordinate measuring machine (CMM). The experimental results show that the average measurement error of center distance is 0.0739 mm, and the standard deviation is 0.0489 mm.