Water-resistant antibacterial properties of a graphene oxide/ cetylpyridinium chloride complex formed on medical gauze fibers

Objectives: Graphene oxide (GO) is a nanocarbon material with a high aspect ratio (width:thickness) and abundant anionic functional groups on its surface. In this study, we attached GO to the surface of medical gauze fibers, constructed a complex with a cationic surface active agent (CSAA), and demonstrated that the treated gauze exhibits antibacterial activity even after rinsing with water.Methods: Medical gauze was immersed in GO dispersion (0.001%, 0.01%, and 0.1%), rinsed with water, dried, and subjected to the Raman spectroscopy analysis. Subsequently, the gauze treated with 0.001% GO dispersion was immersed in 0.1% cetylpyridinium chloride (CPC) solution, immediately rinsed with water, and dried. Untreated, GO-only, and CPC-only gauzes were prepared for comparison. Each gauze was placed in a culture well, seeded with Escherichia coli or Actinomyces naeslundii, and turbidity was measured after 24 h of incubation.Results: The Raman spectroscopy analysis of the gauze after immersion and rinsing showed a G band peak, indicating that GO remained on the surface of the gauze. The turbidity measurements indicated that GO/CPC-treated gauze (GO-treated and rinsed, followed by CPC-treatment and rinsing) significantly decreased turbidity compared to the other gauzes (P < 0.05), suggesting that the GO/CPC complex remained on the gauze fibers even after water rinsing and showed antibacterial activity.Conclusions: The GO/CPC complex imparts water-resistant antibacterial properties to gauze and has the potential to be widely used for the antimicrobial treatment of clothes.(c) 2023 Japanese Association for Oral Biology. Published by Elsevier B.V. All rights reserved.