Modeling and experimental study on deformation prediction of thin-walled turbine blades during investment casting process

Due to variable cross-sections and a thin-walled structure, gas turbine blades have stringent dimensional, and geometrical tolerance requirements. Single-crystal hollow blades are manufactured using the following investment casting processes: ceramic core preparation, wax injection, ceramic coating, wax removal, metal casting, and finishing. The main causes of the final casting deformation are wax pattern deformation, core deflection, and metal solidification warpage. This paper proposes a numerical simulation method to predict the deformation of the wax pattern, core deflection, and the directional solidification (DS) process of large single-crystal blades. Additionally, it investigates the displacement field and the influence of casting process parameters on dimensional accuracy. Three groups of DS process parameters were selected for experiments, and the deformation prediction was in agreement with the experimental results. The selected blade section deformation is the smallest when the pouring temperature is 1530 degrees C and the withdrawal rate is 5 mm/min. The proposed finite element model is efficient to predict the deformation in all the investment casting processes, providing geometric guidance for the control of the dimensional accuracy of the turbine blade.