The importance of time and other determinants in the assessment of heavy metals release during solid waste management

One of the parameters affecting the leachability of heavy metals from waste is their contact time with the leachant. In this paper, the leaching behaviour of Zn, Cu, Pb and Ni was evaluated in relation to the liquid to solid ratio (L/S), which is a reflection of time after which a certain volume of water permeates the material, e.g. in slag heaps or landfills. A leaching study was carried out by different leaching methods with using three test materials, i.e. hazardous zinc slag, lump copper slag and mineral-organic composite. It was found that the highest amount of metals leached in the long term in the maximum availability test, under the following leaching conditions: L/S = 50 dm 3 /kg, reduced pH of the leachant, fragmentation of the materials to particle size < 0.125 mm. Comparing the results obtained in the batch test and the percolation test, no strict trend was observed in the release of a given metal from different test materials. The analysis using the tank test showed that processes controlling leachability can result in the release of the highest metal loads immediately after contact between the material and the leachant, but can also contribute to the release of metals only after prolonged contact.