Theoretical study of highly efficient all-inorganic Sb2S3-on-Si monolithically integrated (2-T) and mechanically stacked (4-T) tandem solar cells using SCAPS-1D.

The power conversion efficiency of all-inorganic Sb2S3-on-Si two-terminal (2-T) monolithically integrated and four-terminal (4-T) mechanically stacked tandem solar cells are investigated. A one-dimensional solar cell capacitance simulator (SCAPS-1D) has been used to simulate the stand-alone antimony trisulfide (Sb2S3) top sub-cell, silicon (Si) bottom sub-cell, 2-T monolithic, and 4-T mechanically stacked tandem solar cells. The stand-alone sub-cells are optimized by extensive studies, including interface defects density, bulk defects density, absorber layer thickness, and series resistance. The power conversion efficiency (PCE) of simulated stand-alone sub-cells is compared and verified with the existing literature. A current matching condition is established to characterize the 2-T monolithic Sb2S3-on-Si tandem cell. A filtered spectrum has been utilized for bottom sub-cell measurement in the tandem solar cells. The best-simulated PCE of Sb2S3-on-Si 2-T monolithic and 4-T tandem cells is 30.22% and 29.30%, respectively. The simulation results presented in this paper open an opportunity for the scientific community to consider Sb2S3 as a potential top sub-cell material in Sb2S3-on-Si tandem solar cells with high PCE.