Time-dependent cracking and brittle creep in macrofractured sandstone

Time-dependent cracking and brittle creep of rock is fundamental to understanding the long-term evolution and dynamic failure in underground rock engineering. In the present paper, we present a systematic laboratory investigation into the control of single open macrofractures of differing orientations on time-dependent cracking and brittle creep in sandstone using digital image correlation (DIC). For a given macrofracture inclination angle β, we find that the failure of macrofractured sandstone under a constant stress is accompanied by the generation of more tensile fractures (wing cracks and secondary cracks) than in our constant strain rate experiments. This result differs from experiments performed on intact sandstones, for which macroscopic failure under a constant stress and constant strain rate were essentially identical. The nucleation site for the wing cracks is β-dependent. As β is increased, the crack nucleation position gradually moves from the center of the fracture towards the fracture tip with a decreasing speed. The kink angle of the secondary crack (k1) increases quasi-linearly with the increase of fracture angle γ. With the increase of the secondary crack angle θ, the kink angle of the tail crack (k2) shows different increasing trends for the left-lateral and right-lateral shear. The secondary crack could be inclined at a maximum of 26° (θ) to the maximum principal stress direction. Creep bursts—transient accelerations in deformation—are more easily triggered in macrofractured rock than in initially intact rock, and coincide in time with the coalescence of secondary cracks. The likelihood of occurrence of a creep burst was found to be higher for lower values of β. Finally, we present a secondary crack location map that defines the swing interval and identifies the fracture mechanism. The influence of a macrofracture, and its orientation, on damage evolution and the likelihood of creep bursts during interseismic periods provides crucial information for those tasked with monitoring hazards associated with the dynamic failure of crustal rocks.