Study of Single Fracture Seepage Characteristics of Fault-Filled Materials Based on CT Technology

In order to study the matrix loss process and skeleton seepage law in the fracture of the fault rock, the three-dimensional model of the skeletal rock sample of the fault rock was obtained by CT scan, and the porous media seepage model was established with different structural types of natural fractures, and the flow rate and pressure distribution law of the seepage in the fracture was obtained by FLUENT software simulation. The results show that: the seepage under different pressure conditions is approximately the same, and the velocity increases continuously with the increase in pressure; The water seepage in different directions of the fracture channels under the same pressure conditions is not exactly the same, which is caused by the different microstructures of the pores. For the pressure distribution, it gradually decreases along the direction of water seepage, and for the speed distribution, it shows the law of changing from large to small and then increasing.