Void Formation and Crack Propagation in a Cr-Mn-N Metastable Austenitic Stainless Steel During Bending

Microstructure evolution via deformation-induced martensitic transformation, void formation, and crack propagation is investigated in a metastable austenitic Cr-Mn-N stainless steel for up to 90 degrees bending using a combination of electron backscattering diffraction and parent grain reconstruction. Stress-strain heterogeneity and stress triaxiality studied using finite-element analysis reveal that the inner and outer radii are in approximately uniaxial compressive and tensile stress states, respectively, with the outer radius showing higher values for von Mises and principal stresses and equivalent strain. Voids are observed at both austenite/alpha '-martensite and alpha '/alpha '-martensite interfaces. Parent grain reconstruction applied to the 90 degrees bending sample reveal that the cracks at alpha '/alpha '-martensite interfaces tend to propagate predominantly along intergranular parent austenite grain boundaries. It is also found that both intragranular and intergranular cracks in parent austenite tend to propagate between alpha '-martensite child-child grains comprising the same crystallographic packets. This is the first study of its kind to comprehensively show this phenomenon. A representative example of intergranular crack propagation within a ⟨110⟩||normal direction (ND)-oriented parent austenite grain is also demonstrated.