Dynamic power and chirp measurements of a quantum dash semiconductor optical amplifier amplified picosecond pulses using a linear pulse characterization technique

Quantum Dash (QDash) SOAs are of interest as an alternative to quantum dot SOAs, since they have some dot-like properties and are easier to fabricate such as to operate in the 1550 nm region, albeit with longer gain recovery times in the range of hundreds of picoseconds. QDash-SOAs are promising core component is optical subsystems for applications in next generation coherent communications and optical signal processing, which often involve pulse amplification. It is of interest to measure both the dynamic power, phase and associated chirp and thereby the spectrum of typical QDash-SOA amplified pulses. Non-linear measurement techniques are appropriate for pulsewidths less than 5 ps but have low sensitivity for wider pulsewidths often encountered in practice. This paper describes the use of a modified linear pulse characterization technique to measure the dynamic power and phase of the identical pulses of a QDash-SOA amplified 20 GHz repetition rate 19 ps pulsewidth pulse train. The pulse chirp and power from which the pulse chirp and pulse train power spectrum is calculated. The amplified pulse structure is strongly dependent on the amplifier gain and the input pulse shape and energy.