Preliminary Study on the Phenomenon and Mechanism of Granite Core Discing in Laboratory Drilling Test

It is generally believed that core discing is a rock failure phenomenon under high in-situ stress, and high stress is closely related to the characteristics of core discing. The core drilling tests of intact granite were conducted on the laboratory servo-controlled drilling test platform. It was observed that the granite core showed discing phenomenon at a high drilling rate (> 15 mm/min) under no confining pressure (0 MPA). The fluctuation of the drilling parameter was consistent with the core discing section along the core. The failure mode of the core discs was determined by morphology and surface fractal dimension characteristics. Numerical simulation models considering the interaction between the drill bit and the rock were established using ANSYS software. Based on core drilling tests, failure morphology analysis of the core discs, and numerical simulation, the mechanism of granite core discing under low confining pressure is as follows: Tensile failure is caused by the stress concentration of the bit at the core root. The drilling rate is the critical factor affecting core discing.