Effects of Corner Set−Backs on Wind Loads and Wind Induced Responses of Rectangular Tall Buildings

In order to investigate the effects of corner set-backs on wind loads and wind-induced responses of rectangular high-rise buildings, pressure measurements were carried out on a benchmark model (CARRC) and four models with different rates (5%, 10%, 15%, 20%) of corner set-backs in a boundary layer wind tunnel. The test results show that the corner set-backs contribute to reducing along-wind loads of the rectangular high-rise building models, and the maximum reduction happens at 10% corner set-back. The across-wind loads decrease as the rate of corner set-back is increasing and the maximum reduction emerges at 20% corner set-back. The RMS accelerations at the top of models also decrease with the increasing of rate of corner set-back in along-wind and across-wind. Through the fitting of test results, empirical formulas for the correlation factors of base moment coefficients of rectangular high-rise buildings with different rates of corner set-back are put forward. Moreover, the correlation factors for the power spectrum densities of base moments are listed at typical frequencies corresponding to the practical tall buildings. The outputs of this paper aim to serve as references for wind-resistant design of similar buildings in strong wind region.