Characterization of a Thermoacoustic-based Pulsed High Power Microwave Detector Chain.

ABSTRACT:Detection of microwave-induced thermoacoustic (TA) wave generation was evaluated as a potential technique for detection of high power microwave (HPM) directed energy exposure. Even when HPM is employed for counter-materiel effects, incidental but still potentially harmful personnel exposure is possible. Real-time detection of ongoing exposure with potentially unknown time and frequency domain characteristics is a critical first step in preventing acute health effects by alerting and then enabling the timely use of electromagnetic frequency energy shielding, such as structures and vehicles. Leveraging the TA effect as a field interaction mechanism, a lossy dielectric polymer subjected to pulsed HPM was tested using a planar sample geometry with thin film piezoelectric sensors used to capture the resulting TA output. The piezoelectric signal was analyzed in both the time and frequency domain to determine empirical relationships between incident microwave beam properties and signal components. This analysis was coupled with an empirically-based single term Cole-Cole model approximation fit for the complex permittivity. The results were used to identify appropriate signal conditioning and processing techniques needed to convert the TA response into a useful form for personnel exposure applications. These results also served as a comparison point for multi-physics finite element method computational modeling of the electromagnetic response of a simplified three-layer tissue model.