Primary Realization of Inductance and Capacitance Scales With a Fully Digital Bridge
IEEE Transactions on Instrumentation and Measurement(2022)
摘要
This article describes an automated electronic fully digital bridge for the comparison of four-terminal-pair (4TP) impedance standards in the audio frequency range. The bridge relative accuracy, which is on the order of 10-6, makes it suitable as a reference bridge for the realization of primary scales of inductance and capacitance in metrology institutes and calibration laboratories. The performances of this bridge were validated by comparing the results of the calibrations of inductance and capacitance standards with those obtained from an existing analog reference system based on the three-voltage method. The article also reports the results of this validation.
更多查看译文
关键词
Bridge circuits,Impedance,Calibration,Capacitance,Standards,Detectors,Synthesizers,Bridge circuits,calibration,impedance measurement,measurement errors,measurement uncertainty
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要