Comparison of Submillimeter Spot Ablation of Copper and Nickel by Multipulse Picosecond and Femtosecond Laser

The current transmission and reflection laser ablation micropropulsion modes have the problem of a complex working medium supply system in engineering. Therefore, we propose large-spot laser ablation with a one-dimensional supply mode. In order to verify this ablation mode, a multipulse ablation experiment of submillimeter-scale light spots was carried out on the surface of pretreated copper and nickel under the atmosphere using an ultrafast laser with a pulse width of 290 fs and 10 ps. The results show that femtosecond laser multipulse ablation (FLMA) leads to the grain refinement of copper, the crater quality of the two metals under FLMA is better, and picosecond laser multipulse ablation (PLMA) causes the crater of nickel to form a dense remelting bulge that affects laser absorption; both metals have obvious heat-affected zones after FLMA and PLMA, the heat-affected zones of nickel are 5-10% larger than those of copper, and the ablation depth of copper is deeper. Under the same conditions, the ablation mass of copper is smaller than that of nickel, and the specific impulse performance of laser ablation micropropulsion is better.