Microbiome reengineering by four environmental factors for the rapid biodegradation of trichloroethylene

Trichloroethylene (TCE) was once a widely applied industrial solvent, but is now an infamous contaminant in groundwater. Although anaerobic reductive dechlorination is considered a greener remediation approach, the accumulation of toxic intermediates, such as vinyl chloride (VC), and a longer remediation period are highly concerning. Biostimulation and bioaugmentation have been developed to solve these problems. The former method may not be effective, and the latter may introduce foreign genes. Here, we propose a new approach by applying environmental stresses to reshape the indigenous microbiome. In this study, by using the Taguchi method, the effects of heating, pH, salinity, and desiccation were systematically examined. The optimum con-ditions were defined as 50 degrees C, pH 9, 3.50% salinity (w/v), and 21% volumetric water content (theta W). The top performing group, G7, can complete the conversion of 11.81 mg/L TCE into ethene in 3.0 days with a 1.23% abundance of Dehalococcoides mccartyi 195 (Dhc 195). Redundancy analysis confirmed that temperature and salinity were the predominant factors in reorganizing the microbiomes. The microbiome structure and its effectiveness can last for at least 90 d. The repetitive selection conditions and sustainable degradation capability strongly supported that microbiome reengineering is feasible for the rapid bioremediation of TCE-contaminated environmental matrices.