Investigation of interfacial structure and dynamic mechanical behavior of titanium alloy laminated composites

Explosive welding is widely used in the manufacture of dissimilar metal composite plates. In this work, TC4/TA1/Ti6321 titanium alloy laminated composites were successfully prepared by explosive welding. The interfacial characteristics of the laminated composites were studied by energy dispersive spectroscopy (EDS), electron backscattered diffraction (EBSD), transmission electron microscope (TEM), and other characterization methods. The dynamic mechanical properties of the laminated composites were investigated by using the split Hopkinson pressure bar (SHPB). The results show that the interface of laminated composites was well bonded. There was a high density of crystal defects including dislo-cations and twins near the interface. The composite plates showed a hard/soft/hard hardness distribution as a whole, and the microhardness increased near the interface. Due to the existence of the interface, the dynamic mechanical properties of laminated com-posites show different results. The dynamic compressive stress-strain curve of laminated composites showed an equilibrium type, and the strain strengthening effect was lower than that of homogeneous materials. The failure mode of laminated composites was adiabatic shear failure mode.(c) 2022 Beijing Institute of Technology, Beijing, China. Published by Elsevier B.V. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/ by-nc-nd/4.0/).