Preparation of hydroxypropyl starch/polyvinyl alcohol composite nanofibers films and improvement of hydrophobic properties.

Starch-derived edible films have great potential as biodegradable food packaging and biomedical materials, in this study, we adopted a green method to prepare starch-based composite electrospun nanofibers films. The hydroxypropyl starches (HPS) were prepared to improve native starch solubility and properties, and a series of blend solutions were prepared with different HPS/polyvinyl alcohol (PVA) weight ratios. The comparison of the properties of HPS/PVA (HPA) nanofibers with different amylose contents were evaluated, and the fibers fabricated from hydroxypropyl high amylose starch (HP-HAS) had more continuous and homogeneous morphologies compared to the other starch fibers, it was also found that the addition of HP-HAS in the film has better mechanical properties than pure PVA film. Thus, to improve the hydrophobicity of the film, the HP-HAS/PVA (HPA(H)) nanofiber was selected for the hydrophobic study by the citric acid (CA) treatment. The hydrophobic surface was formed on the HPA(H) film by CA self-assembled coating with a water contact angle changed from 30.95° up to 100.74°. This study successfully prepared the modified starch/PVA composite nanofibers and established a simple method of self-assembled hydrophobic modification to improve water stability. Therefore, this green strategy is an alternative candidate in further study for food packaging and relative areas.