Enhancement of electrohydrodynamic force with AC bias voltage in three-electrode dielectric barrier discharge plasma actuators

A novel dielectric barrier discharge (DBD) plasma-actuator module with an exposed electrode and two covered electrodes was developed to enhance electrohydrodynamic force generation based on the concept that it separates the ionization and acceleration processes. The conventional three-electrode configuration of the DBD plasma actuator suffers from unexpected spark discharge between the exposed electrodes, thereby failing to strengthen the electric field intensity for accelerating charged particles or generating a stable ionic wind. In this study, a third electrode was embedded in the dielectric layer to prevent spark discharge. Furthermore, an alternating current (AC) waveform was employed as the bias voltage, which was applied to the third electrode, instead of the direct current (DC) voltage used in a conventional DBD plasma actuator. Induced flow visualization using particle image velocimetry technique revealed that the DC bias voltage forms a weak ionic wind in the proposed DBD plasma actuator owing to the electric field screening effect, and the ionic wind periodically appears when the polarity of the voltage is reversed by applying an AC-bias voltage. The velocity of the ionic wind increases with increasing frequency and the AC bias voltage amplitude. Also, decreasing the distance between the second and third electrodes results in ionic wind enhancement. The results obtained in this study provide insights into the drastic improvement in the performance of DBD plasma actuators with the enhancement of the electric field intensity for charged particle acceleration. Published under an exclusive license by AIP Publishing.