Efficient Removal of Eriochrome Black T Dye Using Activated Carbon of Waste Hemp (cannabis Sativa L.) Grown in Northern Morocco Enhanced by New Mathematical Models
Separations(2022)
Abstract
In the present work, the adsorption behavior of Eriochrome Black T (EBT) on waste hemp activated carbon (WHAC) was examined. The surface of the WHAC was modified by H3PO4 acid treatment. The surface and structural characterization of the adsorbents was carried out using Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) analysis. The effect of influential adsorption parameters (pH, contact time, dosage, and initial concentration) on the adsorption of EBT onto WHAC was examined in batch experiments; some adsorption parameters such as pH, concentration and dose were improved by new mathematical models. The adsorption behavior of EBT on the surfaces of WHAC was evaluated by applying different isotherm models (Langmuir, Freundlich, Temkin and Dubinin–Radushkevich) to equilibrium data. The adsorption kinetics was studied by using pseudo-first-order, pseudo-second-order, Elovich and intraparticle models on the model. Adsorption followed the pseudo-second-order rate kinetics. The maximum removal of EBT was found to be 44–62.08% by WHAC at pH = 7, adsorbent dose of 10–70 mg, contact time of 3 h and initial dye concentration of 10 mg.L−1. The maximum adsorption capacities were 14.025 mg.g−1 obtained by calculating according to the Langmuir model, while the maximum removal efficiency was obtained at 70 mg equal to 62.08% for the WHAC. The adsorption process is physical in the monolayer and multilayer.
MoreTranslated text
Key words
cannabis waste,isotherms,Eriochrome black T,biosorbent,mathematical models
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined