THE STUDY ON GLUE-APPLYING METHODS AND HOT-PRESSING TECHNOLOGY OF PARALLEL STRAND LUMBER

Parallel strand lumber (PSL) was manufactured from the veneer strand cut from the poplar broken veneers of the plywood enterprises, by analyzing the influence of the size of veneer strands, the glue concentration and glue-applying time on the glue-absorbing amount of veneer strands, the influence of three different glue-applying was, hot-pressing time and temperature on the physical and mechanical properties of PSL was reviewed and the hot-pressing technology was optimized. The experiment results showed that the size of the veneer strands have not notable influence on the gluing-absorbing amount, and mainly affect the homogeneity and appearance quality of the product. The glue concentration is one main factor to affect the glue-absorbing amount of veneer strands and PF resin of 30% concentration was chosen. The glue-applying way is the main factor to affect the mechanical property of PSL. The hot-pressing time and temperature have significant influence on physical and mechanical properties of PSL. Comprehensively considering, the physical and mechanical properties and homogeneity of products are better using the veneer strands with 100 mm length, the glue-spraying way and hot-pressing technology with the time 35 min and the temperature of 150 degrees C.