Crater Identification Simulation Using Lidar on Lunar Rover
SSRN Electronic Journal(2022)
Abstract
Crater identification is an important task of environment perception, which is benefit for path planning and safe campaign of Lunar rover. In order to overcome the partial missing of point cloud obtained by LiDAR, a three-dimensional data-based crater identification method is proposed to complete the crater by filling in the blind zone for high probability detection, which can be evaluated by completion rate and detection probability of the negative obstacle area in the occupancy grid map, respectively. To obtain a reasonable identification of the craters under various terrain conditions, three parameters related to the terrain and the sensor are varied for evaluating the consequence of crater identification: the terrain frequency, the ranging errors and the angle errors. In simulation experiments, craters with various parameters locate on rolling terrain. The parameters settings used in simulation experiments include the diameter of craters (2 m to 20 m), terrain frequency (>20 m-1), ranging error (<0.07 m) and vertical angle error (<0.3 degrees). The simulation experimental results showed that the proposed method achieves the completion rate of exceeding 84.18 % for providing the complete craters, and the detection probability more than 80.58 % to create the safe occupancy grid map for path planning. This three-dimensional environment perception simulation for crater identification will be instructive for in-situ surface data evaluation and Lunar exploration.
MoreTranslated text
Key words
LiDAR,Environment Perception,Systematic error,Crater identification,Terrain frequency
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined