Effects of Mo addition on microstructure of a 4th generation Ni-based single crystal superalloy

The effects of Mo addition on the microstructure of a 4th generation Ni-based single crystal superalloy were investigated. Mo addition significantly promoted elements Mo, W and Re partition into γ phase and enhanced absolute lattice misfit at 1100 ​°C. The increase of Mo concentration from 2 ​wt% to 4 ​wt% also decreased the content of eutectic islands and the segregation ratios of other alloying elements in the as-cast state, especially Re and W. After heat treatments, the size of γ′ phase and width of γ channels decreased slightly with higher Mo content. More Mo additions slightly enhanced the segregation behavior of Re while reducing the segregation behavior of Mo. However, it revealed that the primary and secondary dendrite arm spacings were barely affected by Mo addition.