Immobilization mechanism of radioactive borate waste in phosphate-based geopolymer waste forms

The solidification of radioactive borate waste (BW), which contains a high concentration of boron ions using cement waste forms is challenging because soluble borate hinders the cement hydration reaction. Here, BW was immobilized using a phosphate-based geopolymer, and the phase change of BW in the geopolymer was investigated. The geopolymers could solidify BW up to 50 wt% depending on the water content and heat curing conditions. In geopolymers cured at high temperatures (60 and 90 °C), the 7-day compressive strength increased as the BW waste loading increased up to 40 wt%. Heat curing promoted geopolymerization and the precipitation of amorphous boron phosphate, leading to an increase in the compressive strength. The formation of a new amorphous boron phosphate phase was confirmed by performing XRD, MAS NMR, and SEM analyses of the geopolymers and reaction products. These results can improve our understanding of the immobilization mechanism of BW in phosphate-based geopolymers.