Multi-temporal InSAR tropospheric delay modelling using Tikhonov regularization for Sentinel-1 C-band data

The increased availability of satellite SAR data coupled with improved InSAR processing algorithms has led to higher accuracy of InSAR-derived displacements. However, obtaining millimeter-level accuracy still remains a challenge due to the inability to accurately model the tropospheric delay, which is sometimes larger than the actual deformation. We propose to estimate the relative daily SAR tropospheric delay by double differencing interferograms that share a common image by leveraging Sentinel-1’s short revisit time and the interchanging role of the common image. The resulting double-differenced interferograms consist of tropospheric delay and processing noise. This combination leads to an inverse problem as a result of the differential nature of the interferograms. The unknown SAR tropopsheric delay is solved by Tikhonov regularization and the processing errors are accounted for by covariance modelling. In cases of rapid localized displacement, the deforming region is masked and the tropospheric delay for the deforming region is determined through kriging. Validation is performed using simulated SAR data and GNSS tropospheric delays. We find a good correlation between estimated SAR tropospheric delays and GNSS tropospheric delays, with an average root mean square error (RMSE) of 1.93 radians across six GNSS locations. In addition, we examine the performance of the correction on interferograms through variogram modelling, which indicates improved correction both for short-wavelength and long-wavelength tropospheric noise. SAR tropospheric delay estimates are integrated into a multitemporal InSAR workflow through either interferometric subtraction or stochastic modelling. Validation using GNSS measurements indicates that SAR tropospheric delay estimates significantly improve the accuracy of the InSAR-derived time-series displacement.