Effects of the penetration height of ethylene transverse jets on flame stabilization behavior in a Mach 2 supersonic crossflow

Effects of fuel jet penetration height on supersonic combustion behaviors were investigated experimentally in a supersonic combustion ramjet model combustor at a Mach speed of 2 and at a stagnation temperature of 1900 K. The jet-to-crossflow momentum flux ratio was varied to control the fuel-jet penetration height, using several injectors with different orifice diameters: 2, 3, and 4 mm. First, transverse nitrogen jets were observed to identify a relationship between the fuel jet penetration height and the momentum flux ratio by focusing Schlieren photography. Then, supersonic combustion behaviors of ethylene were investigated through combustion pressure measurements. Simultaneously, time-resolved images of CH* chemiluminescence and shadowgraphs were recorded with high-speed video cameras. Furthermore, a morphology of supersonic combustion modes was investigated for various equivalence ratios and fuel penetration heights in a two-dimensional latent space trained by the shared Gaussian process latent variable models (SGPLVM), considering CH* chemiluminescence images and the shock parameters. The results indicated that the penetration height of nitrogen jets was a function of the jet momentum flux ratio; this function was expressed by a fitting curve. Five typical combustion modes were identified based on time-resolved CH* chemiluminescence images, shadowgraphs, and pressure profiles. Even for a given equivalence ratio, different combustion modes were observed depending on the fuel penetration height. For an injection diameter of 3 and 4 mm, cavity shear-layer and jet-wake stabilized combustions were observed as the scram modes. On the other hand, although the cavity shear-layer and lifted-shear-layer stabilized combustions were observed, no jet-wake stabilized combustion was observed for an orifice diameter of 2 mm. Fuel penetration heights above the cavity aft wall were expected to affect the combustion behavior. Finally, a morphology of the supersonic combustion modes was clearly shown in the two-dimensional latent space of the SGPVLM.