Tailoring pulsed laser deposition fabricated copper oxide film by controlling plasma parameters
Applied Surface Science(2023)
Abstract
The role of oxygen pressure on the structural and physical properties of various copper oxide phases, grown by Pulsed Laser Deposition (PLD) on MgO (100), has been investigated over the pressure range of 1.10(-)(5) Pa-1 Pa. Positron annihilation spectroscopy revealed positrons trapped at vacancies and large vacancy clusters with lifetimes ranging from 400 ps to 500 ps. Single copper vacancies V al , interesting for p-type applications, were found in the CuO phase, whereas in the Cu2O phase copper vacancy complexes coupled with oxygen vacancies (V-Cu + V-O and V-Cu + 2V(O)) were seen. Suitable O-2 atmosphere conditions, which induced a mixture of copper oxide phases with CuO crystals growing on top of Cu2O films were found. The deposition process was monitored with in situ diagnostic techniques based on Optical Emission Spectroscopy and Langmuir Probe, and enabled identification of kinetic energy ranges for Cu ions, which promote the formation of CuO or Cu2O phases. Kinetics of the plasma during the deposition process correlate well with the properties of the deposited films.
MoreTranslated text
Key words
Pulsed laser deposition,Copper oxide,Defects,In situ plasma monitoring
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined