An efficient process for aromatic VOCs degradation: Combination of VUV photolysis and photocatalytic oxidation in a wet scrubber

The elimination of volatile organic compounds (VOCs) via vacuum ultraviolet (VUV) photolysis is greatly limited by low removal efficiency and gaseous byproducts generation, while photocatalytic oxidation of VOCs suffers from catalytic deactivation. Herein, a coupled process of gaseous VUV photolysis with aqueous photocatalytic oxidation with P25 as the catalyst was firstly proposed for efficient aromatic VOCs removal (VUV/P25). The removal efficiency of toluene reached 86.2% in VUV/P25 process, but was only 33.6% and 58.1% in alone gaseous VUV photolysis and aqueous ultraviolet photocatalytic oxidation (UV/P25) process, respectively. Correspondingly, the outlet CO2 concentration in VUV/P25 process reached 132 ppmv. Toluene was firstly destructed by high-energy photons generated from gaseous VUV photolysis, resulting in its incomplete oxidation to form soluble intermediates including acids, aldehydes, esters. These soluble intermediates would be further degraded and mineralized into CO2 in subsequent aqueous UV/P25 process. Notably, the concentrations of in-termediates in VUV/P25 were much lower than those in VUV photolysis, indicating the synergy effect of VUV photolysis and UV/P25 process. The stability tests proved that VUV/P25 process maintained an excellent toluene degradation performance and P25 did not suffer from catalytic deactivation. In addition to toluene, the VUV/P25 system also achieved the efficient and sustainable degradation of styrene and chlorobenzene, suggesting its good application prospect in industrial VOCs treatment. This study proposes an efficient and promising strategy for deep oxidation of multiple aromatic VOCs in industries.