Residual Stress Enhancement by Laser Shock Treatment in Chromium-Alloyed Steam Turbine Blades

In-service turbine blade failures remain a source of concern and research interest for engineers and industry professionals with attendant safety and economic implications. Very high-pressure shock impacts from laser shots represent an evolving technique currently gaining traction for surface improvement and failure mitigation in engineering components. However, the physical characteristics and effects of parameter variations on a wide range of materials are still not fully understood and adequately researched, especially from a computational point of view. Using the commercial finite element code ABAQUS (c), this paper explores the application of laser shock peening (LSP) in the enhancement of residual stresses in Chromium-based steel alloyed turbine blade material. Results of the numerically developed and experimentally validated LSP model show that peak compressive residual stresses (CRS) of up to 700 MPa can be induced on the surface and sub-surface layers, while the informed varying of input parameters can be used to achieve an increase in the magnitude of CRS imparted in the peened material. Analysis of the hierarchy of influence of the five input parameters under investigation on residual stress enhancement reveals the laser shock intensity as the most influential, followed in descending order of influence by the exposure time, shot size, degree of overlaps, and the angle of shot impact.