Research on the Mechanical Properties of Flexible Material Backfilling Wall in Gob-Side Entry Retaining

In order to solve the problems of the uneven deformation of Gangue Filled Wall and the difficulty of large-scale promotion of roadway side support, and to achieve the purposes of direct disposal of coal mine waste, reducing costs, and protecting the environment, the failure mechanics model of the bagged gangue was established, and the mechanical action relationship between longitudinal external load and transverse external load of gangue woven bag was deduced. Through the uniaxial compression test of large-scale flexible backfill (coal gangue of different particle sizes), it was obtained that when the strain is 0.2, the bearing capacity of particles with particle sizes between 0 and 10 mm is greater than 5 MPa, and when the strain is 1.27, the bearing capacity of particles with particle thicknesses between 10 and 20 mm is greater than 0 mpa, which meets the requirements of resistance value and resistance growth rate of gob side entry. In the "load deflection" test of backfill (gangue) samples, it was found that the maximum failure load of wet shotcrete is greater than that of dry shotcrete, and the wet shotcrete can withstand greater deformation under the same load conditions. Through the analysis of the experimental results of "flexural strength thickness" and "maximum failure load thickness", it was finally determined that the thickness of the spray layer with good flexibility and sufficient support force is controlled at about 80 mm.