Investigation on the progressive collapse resistance of three-dimensional concrete frame structures reinforced by steel-FRP composite bar
Journal of Building Engineering(2022)
Abstract
Compared with conventional steel bars, steel-FRP (fiber reinforced polymer) composite bars (SFCBs) have distinctive post-yield stiffness, and the high efficiency of SFCBs in enhancing the progressive collapse resistance of concrete frames has been confirmed by recent quasi-static experimental studies on SFCB beam-column subassemblages. However, the realistic progressive collapse of structures is a dynamic process, and the three-dimensional (3D) effects are essentially important for determining the collapse response. In this study, numerical models are built to explore the progressive collapse behavior of 3D frame structures reinforced by SFCBs. The static and dynamic capacities of five SFCB frames and one reinforced concrete (RC) frame are compared under different column-removal cases. Results show that by virtue of the post-yield stiffness, the static load factors of SFCB frames are much larger than those of RC frames at the same deformation, proving that SFCB frames have better robustness against collapse failure than RC frames. After the dynamic removal of columns, all RC frames are subjected to progressive collapse failure, while SFCB frames can successfully complete the dynamic load redistributions and quickly reach a steady state. Further, the dynamic increase factor (DIF) of SFCB frames is proposed based on the ratio of maximum dynamic flexural responses to static flexural responses of beam joint sections under the same gravity loads (1.2 times dead load plus 0.5 times live load), and the conservative DIFs of 1.55 and 1.3 are recommended for a corner column-removal case and the other single column-removal cases, respectively. Finally, parametric analyses are conducted to reveal the effect of beam longitudinal reinforcement ratio, beam span-to-depth ratio, and dynamic duration for the column removal on the progressive collapse resistance of SFCB frames. The results lay a foundation for the progressive collapse design of 3D SFCB frame structures.
MoreTranslated text
Key words
Progressive collapse,Steel -FRP composite Bar (SFCB),3D effects,Dynamic increase factor (DIF),Secondary stiffness ratio
AI Read Science
Must-Reading Tree
Example
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined