The influence of PEGDA’s molecular weight on its mechanical properties in the context of biomedical applications

Abstract Hydrogels are 3D polymeric networks, which exhibit properties such as softness, viscoelasticity and their ability to absorb large amounts of water. These characteristics make them exceptionally suitable in biomedicine as e.g. tissue scaffolds, drug delivery systems, wound dressings or contact lenses. One of these hydrogels is the biocompatible, hydrophilic and photopolymerizable poly(ethylene glycol) diacrylate (PEGDA). It is used in different biomedical applications due to its tunable mechanical characteristics. In our study, the mechanical properties of different PEGDA hydrogel compositions with variyng molecular masses and contents of water/methanol, were investigated. Different compositions containing 20 m%, 30 m% or 40 m% of PEGDA4K(4,000 g/mol), PEGDA10K(10,000 g/mol) or PEGDA20K(20,000 g/mol) in ultrapure water/methanol (1:2) were produced. Dumbbell-shaped samples were prepared in molds via photopolymerization in a UV chamber. Lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) was used as photoinitiator (0.5% w/w). The mechanical testing was performed using a uniaxial testing system. The obtained results showed averagely 78% higher tensile strength (σmax) values for 30 m% and 40 m% samples in comparison with 20 m% samples for all of the tested polymers. PEGDA20K30 m% samples showed the highest σmax among all of the samples with 12.8 MPa. All of the PEGDA20K samples exhibited the highest elongation at break (εB) values (up to 958%), whereas the lowest values were found for PEGDA4K(up to 105%). The obtained stress-strain curves for most of the samples were typical for deformable, amorphous polymers with a deformation upon reaching a critical stress point. The PEGDA materials showed variable mechanical characteristics according to changing molecular mass or polymer concentration. These promising results showed that it should be possible to compose scaffolds with desired mechanical stability according to the needed application.