Characterization of Residual Oil Distribution in Sandstone by NMR: A Microscopic View on Oil Recovery by Miscible CO2 Flooding

Lithosphere(2022)

引用 0|浏览0
暂无评分
摘要
Abstract Miscible CO2 flooding gains rising popularity due to high displacement efficiency and potential carbon negativity. It is well documented that pore-level heterogeneity is one of the dominant mechanisms responsible for the variation in oil recovery efficiencies of miscible CO2 flooding. However, owing to a lack of understanding of miscible CO2 displacement behaviors at pore level, quantitative analysis of the mechanisms for the influence of pore-level heterogeneity on the oil recovery efficiency of miscible CO2 flooding remains problematical. Recently, NMR has been widely used to investigate microscopic residual oil distribution and pore-level displacement behaviors of various agents. Nevertheless, current NMR-based methods for determining microscopic residual oil distribution require the use of fluorinated oil, Mn2+ solution, or heavy water for eliminating the mutual interference of oil and water NMR signals. The differences in properties of reservoir fluids and additional agents could give rise to the change in displacement characteristics and consequently affect the analysis results on pore-level displacement behaviors. In this study, a method to determine microscopic residual oil distribution in sandstone during gas floodings based on NMR T2 spectrum without additional agents except reservoir fluids is proposed. Using the method, we can avoid the possible changes in the displacement characteristics caused by additional agents. Miscible CO2 flooding experiments are conducted with ultra-low and extra-low permeability cores. The T2 spectra of cores before and after flooding are measured using a 23 MHz low-field NMR instrument. Residual oil distributions in cores are quantitatively characterized using the proposed method, and then, oil recovery efficiencies from different-sized pore throats are evaluated. It is found that for both cores about 60% of the residual oil is distributed in pore throats with <0.26 μm radius. Oil residing in pore throats with >0.03 μm radius is displaceable for miscible CO2 flooding, which indicates that the thickness of the raffinate layer in the pore should be less than 0.015 μm. More than 30% of the residual oil is distributed in unswept areas, and thus, the sweep efficiency improvement is expected to effectively enhance the oil recovery of miscible CO2 flooding. The sweep efficiency is negatively affected by the pore-size heterogeneity. For the ultra-low and extra-low permeability cores, the standard deviation of pore size is 0.39 and 1.15, respectively, and correspondingly, the sweep efficiency is 84.33% and 72.84%, respectively. In the core, the oil recovery efficiencies from swept pore throats with <3 μm radius are similar and exceed 50%. Pore throats with >3 μm radius can form a preferred flow path, which will significantly reduce the oil displacement efficiency from swept pore throats with <3 μm radius. The findings of this study can help for better understanding of the microscopic CO2 miscible displacement behaviors and the mechanisms for the influence of pore-level heterogeneity on the oil recovery efficiency of miscible CO2 flooding.
更多
查看译文
关键词
oil recovery,sandstone,residual oil distribution,nmr,co2
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要