Microscopic mechanism of contraction of tension wood G-fiber due to boiling

Cellulose(2022)

引用 3|浏览3
暂无评分
摘要
Many woody eudicot plants form a secondary xylem composed of gelatinous fibers (G-fibers) called "tension wood" (TW) along the upper side of the tilted stem or branch. TW generates a large tensile growth stress in the longitudinal direction, allowing the tilted stem or a branch to develop negative-gravitropism in response to the strong gravitational stimulus. This is because the G-fiber tends to contract in the longitudinal direction as it matures. The matured G-fiber also contracts upon boiling in water (= hygrothermal treatment, i.e., HT-treatment), and moisture desorption (= drying treatment). These contractions occur in the cellulose-rich gelatinous layer (G-layer) as an innermost layer of the G-fiber. It is still an unsolved mystery how the G-layer, which is composed of highly crystallized and longitudinally oriented cellulose microfibrils (CMFs), contracts during maturation, boiling, and drying. In the present study, TW specimen of Konara oak ( Quercus serrata L.) was subjected to HT-treatment under different temperature and time conditions, and strain due to treatment was followed. Besides, the mass loss due to HT-treatment was also followed. Obtained results are summarized as follows. (1) Green TW specimen of Konara oak contracted in the longitudinal direction when subjected to the HT-treatment at a treatment temperature higher than 40 °C, which eventually converged to a constant value according to each treatment temperature. Magnitude of the longitudinal HTR-strain in the TW specimen was positively correlated with the treatment temperature in the range from 40 to 120 °C, whereas in the normal wood (NW) specimen, it does not occur explicitly when the temperature is less than 100 °C. (2) Both TW and NW specimens showed mass loss when subjected to the HT-treatment. The mass loss rate increased rapidly by the HT-treatment at 120 °C, while it was only slight below 100 °C. There was no significant difference between the mass loss behavior of TW and NW by the HT-treatment. From analyzing those results, physical behavior of CMF and other non-cellulosic matrix components in the G-layer during the HT-treatment was estimated. The discussion was further developed to associate HT-contraction with microscopic mechanisms of the other two characteristic contractions of the G-fiber, i.e., maturation strain and drying shrinkage. Graphical abstract
更多
查看译文
关键词
Hemicellulose, Dimensional stability, Growth stress, Drying shrinkage, Gelatinous layer
AI 理解论文
溯源树
样例
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要