Chrome Extension
WeChat Mini Program
Use on ChatGLM

Metrological Control of Technical Characteristics Evaluation of Building Materials and Products

Central Ukrainian Scientific Bulletin. Technical Sciences(2022)

Cited 0|Views0
No score
Abstract
The problem of assessing the possible relative errors of the technical characteristics of building materials when testing samples of the correct geometric shape has been solved. The work is based on the theory of errors and on the method of linearization of functions of random variables. The technical characteristics of the materials are determined by the equations of indirect measurements through the input parameters, directly measured during the tests with known level of accuracy. Linearization of the equations of indirect measurement allowed to obtain dependences for determining the standard and probable relative errors of determining the average density, humidity, water absorption and compressive strength of building materials. Samples of the correct geometric shape of the following types are considered: cube, parallelepiped, circular cylinder. The input values of the obtained formulas are the size and weight of the samples, as well as the destructive force during compression. The accuracy of direct measurement of these values is determined by the values of division of the corresponding measuring instruments. The obtained formulas give possible relative errors of indirect measurements of the analyzed technical characteristics corresponding to the given two-way security level. The use of the obtained formulas allows you to reasonably choose the means for measuring the input parameters that provide the necessary accuracy of the results of determining the technical characteristics with the maximum ease of performing the measurements. The method for assessing the accuracy and the choice of measuring instruments for measuring the size and mass of samples is illustrated by an example of determining the average density of a mortar based on the results of testing cubic samples of different sizes. The results of the study can be used in the experimental determination of the analyzed technical characteristics of building materials of other types, as well as extended to assess the accuracy of other technical characteristics, which are determined by indirect methods.
More
Translated text
Key words
Chip Design Verification,Vibroacoustic Characteristics
AI Read Science
Must-Reading Tree
Example
Generate MRT to find the research sequence of this paper
Chat Paper
Summary is being generated by the instructions you defined