Development and Evaluation of Newly Designed Coaxial Cylindrical Plasma Reactor with Liquid Flow Control and Post-Discharge Reactions for Water Treatment

Water purification by non-equilibrium atmospheric pressure plasma has attracted much attention and is expected to be a next-generation method. However, general approaches to improve the energy efficiency of the water purification have not been revealed. Therefore, to investigate important factors for increasing its energy efficiency, we developed coaxial cylindrical plasma reactors where pulsed streamers were generated between a high-voltage electrode and running water film. To evaluate the performance of the plasma reactors, we measured hydroxyl (OH) radicals in solution based on a chemical probe method using disodium terephthalic acid (NaTA) and decolorized indigo carmine solution. Our experimental results showed that the production rate of the OH radicals was approximately 20 nmol/s and that the energy efficiency of the decolorization was on the order of 10 g/kWh. In addition, we found that controlling liquid flow based on the Coanda effect and introducing the intermittent operation of the streamer discharges to use post-discharge reactions increased the energy efficiency by a factor of approximately 3.5, which indicated that these approaches are effective to improve the performance of the water purification by plasma.