Interlayer directional coupling thermo-optic waveguide switches based on functionalized epoxy-crosslinking polymers

In this study, interlayer directional coupling (DC) thermo-optic (TO) waveguide switches were designed and fabricated using functionalized epoxy-crosslinking polymers. Fluorinated SU-8 (FSU-8) with a photo-initiating epoxy-crosslinking network was self-synthesized as a waveguide core material. A copolymer of methyl methacrylate and glycidyl methacrylate P(MMA-co-GMA) with a thermo-initiating epoxy crosslinking structure was self-synthesized as a waveguide cladding material. Compared with commercial pure SU-8 and PMMA, FSU-8 exhibited a lower absorption loss and P(NEVIA-co-GMA) exhibited a higher thermal stability. Using epoxy-crosslinking functionalized polymers, the structure of the waveguides and electrode heaters were optimized, and the performance parameters of the interlayer DC TO switches were simulated. At a signal wavelength of 1550 nm, the insertion loss, extinction ratio, and power consumption of the actual interlayer devices were measured as 6.7 dB, 15.6 dB, and 9 mW, respectively. The rising and falling response times of the TO switches were obtained as 631.6 Lis and 362 Lis, respectively. The self-leveling ability and solvent resistance characteristic of the epoxy-crosslinking network for FSU-8 and P(MMA-co-GMA) may guarantee the realization of interlayer DC TO waveguide switches. The proposed technique will be suitable for photonic integrated waveguide chips with multilayer stacking dynamic optical information interactions. (C) 2022 Optica Publishing Group under the terms of the Optica Open Access Publishing Agreement