Measurement of the Machined Surface Diameter by a Laser Triangulation Sensor and Optimalization of Turning Conditions Based on the Diameter Deviation and Tool Wear by GRA and ANOVA

One of the most important operations in the technological production process is the inspection of the manufactured product. The gradual wear of the tool affects the achievement of the required quality of the functional surfaces. In this research, we present the results of measuring the diameter deviation with a new generation laser triangulation sensor (LTS). At the same time, we have performed parametric optimization of several multi-responses, such as insert wear on the VBB flank side of cutting edge and diameter deviation Delta(d) for a C45 steel sample during dry turning and using a sintered carbide insert, using the method of grey relational analysis (GRA) in combination with the Taguchi L16 orthogonal array. The optimal setting of input factors for multi-response parameters is a(p) 4-f 4-v(c) 1 i.e., depth of cut 0.5 mm, feed 0.4 mm per revolution, and a cutting speed of 70 m/min. At the same time, we present an evaluation of the significance of input factors using the method ANOVA.