Response Surface Methodology Analysis of the Effect of the Addition of Silicone Oil on the Transfer of Carbon Dioxide during Bioleaching of Mining Tailings by Native Microorganisms

The bioleaching of manganese present in mining waste after metal extraction can be catalyzed by Leptospirillum (L.) ferriphilum by allowing atmospheric carbon dioxide to be used in this autotrophic process and generating the subsequent recovery of silver. Bioleaching of metals is widely performed in agitated tanks; therefore, it is important to assess the mass transfer capacity of gaseous substrates, such as carbon dioxide, during the microbial processes. The main objective of this research was to evaluate the effects of the presence and concentration of a transfer vector (silicone oil) added into a stirred-tank bioreactor during bioleaching of mining tailings catalyzed by L. ferriphilum, determined by the combined gas/oil mass transfer coefficient of carbon dioxide (k(LaCO2)) into the aqueous phase. The experiments were carried out following a Box-Behnken experimental design, evaluating the concentrations of mining waste (30%, 40%, and 50%), Fe2+, serving as electron donor (2, 8, and 14 g/L), and silicon oil (0%, 5%, and 10%). A significant increase in k(LaCO2) was observed after the addition of the transfer vector by comparing the lowest k(LaCO2) value of 1.68 h(-1) (obtained at 50% pulp, 8 g/L Fe2+, and 0% silicone oil) and the highest k(LaCO2) of 21.81 h(-1) (obtained at 30% pulp, 2 g/L Fe2+, 5% silicone oil). The results showed statistically significant differences in the transfer of carbon dioxide during the bioleaching process with a transfer vector.