Study on Dynamic Amplification Factor of UHV Pillar Equipment

Abstract In the research of UHV pillar equipment, the dynamic amplification factor of bracket is a key parameter. This paper mainly focuses on the relationship between the dynamic amplification factor of ceramic equipment under the condition of seismic acceleration response spectrum when the structural parameters of the bracket are the same. In this paper, the stiffness of the bracket is changed by altering the elastic modulus of the steel. The dynamic amplification factors of the speed, displacement, stress and acceleration of the bracket in the two kinds of overall structures are compared and analyzed by numerical simulation. At the same time, the relationship between the bracket frequency and the steel consumption is compared by calculating the steel consumption of different bracket structures. Based on the results of simulation analysis and considering the seismic design of porcelain electrical equipment in UHV substations and converter stations, it is suggested that the dynamic amplification factor, the envelope of displacement and stress amplification factor of 1.40 should be adopted, thus providing a theoretical basis for the design of UHV bracket equipment.