Simulation Analysis of Influence of Different Parameters on Sliding Failure and Compressive Failure of Carbon Fiber Reinforced Polymer

Carbon Fiber Reinforced Polymer (CFRP) is an anisotropic material with outstanding tensile strength in the direction of axial but low compressive strength in the direction of radial, so the radial compressive failure and sliding failure are easy to occur in the practical application of compression and hanging wires. In this paper, the influence of different parameters on radial compressive failure and sliding failure is studied. The finite element method is used to simulate and analyze the CFRP and wedge clamp to find optimum condition parameters to make the CFRP neither sliding failure nor radial compressive failure. The parameters are as follows: interference between the CFRP and the inner wedge, friction coefficient between the CFRP and the inner wedge, angle of the wedge, inner wedge material elastic modulus. The results show that the most appropriate parameter is: the interference between 0.0236mm and 0.0252mm, the friction coefficient between 0.194 and 0.206, the wedge angle is greater than 1.75° and the elastic modulus of wedge material has little influence on the compressive failure and slippage failure of the CFRP.