Adsorption of Congo Red by Fibrous Xonotlite Prepared from Waste Silicon Residue
Water science & technology(2022)
摘要
Fibrous xonotlite was synthesized under the conditions of Na2SiO3 concentration of 0.05 mol·L-1, molar ratio of Si/Ca of 1:1, temperature of 220 °C and time of 9 h. It is worth pointing out that the Na2SiO3 solution as raw material was obtained from silicon residue through several procedures. The fibrous xonotlite exhibits excellent adsorption capacity for Congo red. 50 mL solution of Congo red with the concentrations of 100, 150 and 200 mg·L-1 can be almost completely adsorbed by 30 mg of fibrous xonotlite within 10 min, and the adsorption ratios are 94.05%, 95.50% and 94.14%. The Langmuir model describes the adsorption well, indicating the adsorption is monolayer. The adsorption kinetics follows the pseudo-second-order model. The calculated maximum adsorption capacity of fibrous xonotlite for Congo red is 574.71 mg·g-1 at room temperature. Fibrous xonotlite is a potential efficient adsorbent for Congo red owing to its rapid adsorption, high adsorption capacity and regeneration capacity.
更多查看译文
关键词
adsorption,Congo red,fibrous xonotlite
AI 理解论文
溯源树
样例
![](https://originalfileserver.aminer.cn/sys/aminer/pubs/mrt_preview.jpeg)
生成溯源树,研究论文发展脉络
Chat Paper
正在生成论文摘要